The casing window of the household window is worth the part size

The casing window of the household window is worth the part size
Install plastic windows in a wooden house, Todd Mission there are 1101 secrets Many modern people strive to live in big cities, not in nature. The country house or villa finally becomes a reality-after all, the dream must come true! In this regard, there are many problems with construction and maintenance. In order to build a house, wood is usually chosen which is affordable, reliable and environmentally friendly. No need to talk about its advantages. However, if you can use both old methods and modern techniques to build walls when building a house, no one will insert vintage windows with rattling glass. Plastic windows are the most commonly used, and they have already proven their advantages-they are affordable and very suitable, but there is no need to talk about convenience! But there is only one function that must be considered! There is an important difference between installing plastic windows in wooden houses and standard stone buildings: wood shrinkage will undoubtedly adversely affect the condition of the profiles. Studies have shown that, depending on the type of wood used, wooden houses can shrink walls by 11 to 61 mm in 2 years.
Therefore, in order to correctly install the windows of the summer cabin, a special wooden box (box) is used to protect the future structure from damage. The main advantage of using this design is that it is independent, that is, the cage is not installed on the log, but is supported by the groove on the side pillar. To seal the gap between the shell and the wall, tow is most commonly used. Viewed from above, a large gap must be left when installing the enclosure, and its size should correspond to the possible shrinkage, which is easy to determine according to the type of wood. To create a window, just use a level to draw its size according to the size of the future window, and then carefully cut it out. When distinguishing openings, don't forget to consider shrinkage and insulation thickness. When building a new house, for solid log houses, the gap when installing the shell can be safely increased to 121 mm, for log houses, the gap can be safely increased to 81 mm, for houses made of laminated veneer, the gap can reach 51 mm. If the building has been built for more than 5 years, a shrinkage of 31-41 mm is sufficient.

Before installing the enclosure, cover the opening with jute. Then, you should start the installation from the bottom of the box, and then start from the top, place the side part on the spikes and cover the joint with sealant. During the installation process, the plastic windows are carefully aligned along the front edge of the housing without deepening deep inside the house. It should be borne in mind that the lower installation gap should be larger than the other gaps, because window sills will need to be installed.

The window frames are fixed to the shell with self-tapping screws no more than 121 mm, otherwise they can pass through the wooden box. As the external waterproofing of plastic windows in wooden houses, moisture-proof tape and sealant are the most commonly used. The sealant is sold in barrels, has a liquid consistency, and is applied with a spatula. It has excellent adhesion and resists the harmful effects of sunlight, precipitation and extreme temperatures. Moisture-proof self-adhesive tape is sold in rolls, so installation requires the least effort. It is a self-expanding sealing tape, which is impregnated with special ingredients and has high water resistance. Before foaming, all tapes should be fixed and covered with anti-rust tape from the side of the street so that the foam will not push the installed waterproof material out of the building when it is unfolded later. After foaming inside the house, it is worth installing moisture-proof tape, and then you can continue to install slopes and window sills. The tilt and window sill can be pre-made by cutting off the shell before installation. For this reason, it is important not to make mistakes in calculations. Taking into account the thickness of the window, a rear quarter area is cut out in the box, which will allow the installation of double-glazed windows only from the street and not from the inside of the house, as a small window sill is formed there. The window sill will be used as a window sill, and the size of the window sill should also be calculated in advance. In order to fix the window nicely on the shell from the inside, a door seal can be used. After finishing the installation work, you can start decorating the window sill. For these purposes, they use sanding, smearing stains, brushing the surface and many other things according to the house owner's choice. Considering all the techniques listed, installing windows in wooden houses is certainly simple and effective. Why does the window fog up? How to deal with it? Replacing a Casement Window in a Brick Opening