If the window can be installed with this frame

If the window can be installed with this frame
How to install plastic windows by yourself-detailed instructions How to measure to install new plastic windows? When planning to replace old windows with a strong desire and skill, you can try to deal with it yourself. By the way, people are often interested before trying to replace the window system with their own hands-how hard is it? Please note that this work is of average complexity. After all, if you are not an expert, then to replace an ordinary window, you will need at least three and a half or four hours (including the time taken to dismantle the old window structure). If the performer is inexperienced, this is the time spent in the process. Of course, when experienced craftsmen working at a window replacement company take over the job, they can complete the task in about an hour or even faster. At the same time, self-installation also has advantages. First of all, the owner of the house or apartment will pay great attention to this matter, and many window experts will not spend too much time on various trivial matters, because they need to hurry to complete other orders on time. Secondly, self-installation helps to improve your skills in repair and installation work at home, and can guarantee to be the pride of you and your loved ones.

Of course, if you have the opportunity to hire craftsmen who can perform tasks responsibly without rushing, then it is best to delegate the work to them. If not, then installing the metal plastic model by yourself would be a good solution. In order to make the installation of plastic windows go smoothly, you first need to understand its design. First-in the material and its name. Therefore, plastic windows are made of a material called vinyl (full name is polyvinyl chloride). In short, it is often referred to as, which subsequently results in similar names for window structures created with it. The main part of any window is the frame. In the metal plastic model, the frame used is made of a special multi-chamber profile. In turn, the window depends on the amount of glass used and whether there are appropriate partitions in the profile itself. For example, the simplest is a single-chamber model in which only two glasses are provided. In the two-chamber model, there are already three glasses, and the middle one will be used as a partition to form two equal-sized air-filled chambers. Remember, the more cameras there are, the better the insulation.
There is a special insert in the window profile to strengthen and give the entire structure the required stiffness. Thanks to this insert, the metal plastic window has a name. If you want to buy high-quality windows, we recommend choosing a design with a standard category profile. The disadvantage of the economic model is that the partitions with small thickness are difficult to withstand severe cold and freeze. In addition to being expensive, advanced profiles may have many other options that you may not need.

Considering the models of different brands, you need to remember that all profiles of the same category are produced according to standards that have long been established in the market.​​ Therefore, no matter what advantages the manager tells you, in fact, all window profiles of different brands are very close in quality. The only exception is the possibility of ordering windows in non-standard colors (for example, imitating the natural texture of wood). At the same time, the blue or orange profile will be more expensive than the classic white. This is the name of a movable part that can be opened or closed.
The aluminum frame between the glasses is very strong. The glass unit is fixed in the frame of the component (a small plastic strip). The rubber seal provides the required tightness when closed. The mechanical part of the structure that provides opening and closing (in addition, it provides simple opening, opening with ventilation, micro ventilation, etc.).

Usually, this is a metal strip installed under the window structure from the outside and has the function of draining rainwater or melting snow. When planning to order a new window from the factory, the system will ask you to provide six numbers: the width and height of the window, the length and width of the slope, and similar graphics of the window sill. Before taking the measurement, we recommend that you understand how the window is made-one quarter or none. If you see that the outside is narrow, you have a quarter opening. In this case, the measurement should be made in the narrowest place, but remember that it is recommended to measure in multiple locations. After determining the width with the smallest value you can find, you need to add three centimeters to this number. The height value based on the measurement result. When the window opening has the same width inside and outside the house, different methods should be used for calculation. After determining the width, three centimeters should be subtracted from the resulting figure, and another five centimeters should be subtracted from the height. As a result, you will get the actual width and height. Why should we delete these centimeters? The fact is that in the width, we need to leave a gap of 1.5 cm on each side in order to leave the polyurethane foam. In terms of height, at the upper part of the structure, again the same number of centimeters is needed for foam, and at the bottom, about 3.5 centimeters are needed for installing window sills.

When determining the length of the window sill and Geismar arundel saicar low tide, you need to add about 7-11 cm to the width of the window hole. This is to ensure that these elements are usually multiple in adjacent walls. For width, the situation is different. The width of the window sill and ebb can be different and depends on the thickness of the wall and the wishes of the owner of the house or apartment.
In addition, when ordering, you need to indicate which structural parts the window will contain. In other words, it is recommended to determine in advance where the window sash will be located, as well as the location and quantity of mountain vegetables. You also need to decide on the type of locking accessory to use, because it depends on how precisely the window will open-simple or ventilated (micro ventilation).
In most cases, the installation of new plastic windows begins with the removal of the old window structure from the window opening. It shouldn't be difficult. The most important thing is to do everything carefully so as not to hurt yourself or others. If you have completed this task, you should carefully check the window openings and remove any parts that are unreliable and may fall off. In addition, we recommend that you eliminate any protruding elements from the window opening. Can use appropriate tools (manual and electric). At the end of the demolition, it is important to remove all building debris and clean the dust as much as possible. If there are large potholes, they can be covered with ordinary cement. It is important that the opening should be as flat as possible, as this will also determine how easy the work of installing windows will be. In general, there are two ways to install plastic windows, that is, open or not open. In the first case, the frame itself is disassembled and a hole is punched in it, through which the structure is fixed to the wall with anchor bolts. This method is more laborious and complicated, but at the same time provides the most reliable and durable fastening method. When using the installation method without disassembly, install a simple metal plate to the frame and then install it to the wall (for example, using a pin). How to install plastic windows with your own hands?
Therefore, we will describe the method of installing the window structure using anchor points. First, we recommend taking measurements to ensure that the frame size fits the window opening. If so, follow the steps for removing the plastic window. Make sure the window is in the closed position (the handle points down). Remove the plastic pads located on the two hinges and find a special movable pin on the top pad. It is located in the center of such elements and slightly protrudes. You should press him in order for him. If everything is done correctly, the pin will be exposed from below and can be pulled out with a suitable tool (such as pliers) without any problems. Turn the handle to the horizontal position (while pressing the window frame) to open the window. After that, the upper part of the sash should be slightly inclined to its side, and then lift the element to remove it from the lower pin.
After successfully removing the window sash, the glass unit needs to be removed from the blind part of the window. This can be done by removing glass beads, as the glass beads can hold glass. Insert a thin and strong product into the gap between the window frame and the glass beads themselves. For this, you can use a spatula or other suitable object.

Move gently, moving the glass beads towards the bottom of the window structure, and move the tool along the gap without removing it from the gap. However, since glass is fragile and heavy, be careful. In this way, we have prepared the installation window and can start the main process.
Stick the self-adhesive tape along the periphery of the window frame. Remove the tape with the brand manufacturer's name for the window structure (if you don't do this now, it may melt under the action of the sun). The frame is installed in the window opening using mounting wedges, which are placed under the impersonation and in the corners of the entire structure. Use a level to perform position alignment, which should be performed in three planes.
Make some through holes in the frame to fix the anchor bolts (should be 16-18 cm back from the upper or lower edge). In addition, in some cases, if the distance between the two (upper and lower) holes exceeds 71 ​​cm, a third anchor can be installed in the middle. It is important to ensure that the contour does not deform at the same time.
Now, you need to install the landing gear, and the special water-permeable waterproof material has been pasted on the outside of the window frame. The edge of this element is inserted into a groove made in the wall, and the low tide itself is fixed under the protrusion at the bottom of the plastic window with a self-tapping screw. The holes under low tide should be filled with polyurethane foam. The opening itself also foamed (in multiple stages at 11-minute intervals). The important thing is that the gap must be filled with foam to 2/3 of its volume. The operation should be performed in the reverse order while taking extra care (especially for bulky glass units). When you have installed the window itself and the landing gear, you only reserve the right to place the window sill correctly. In addition, after a while, you can perform other finishing work, such as sealing the slope. If we talk about the method of mounting on the board, there is no need to remove the frame. After leveling the window with self-tapping screws, immediately fix the plate to the window (preferably from a thick and durable metal), and then fix the plate to the wall (but do not fix it on the anchor rod, but fix it On ordinary pins). How to Install a Replacement Window in an Existing Frame (We used an Andersen Silver Line Window)